This is a alternative to using a Intercooler on your Turbo car, instead of using air to cool your turbo charge it uses water pumped around a circuit though a radiator to cool the charge it can be much more efficient, also can be a better use of space in the engine bay, no need to cut hole in the front for large intercoolers.
all our intercooler has been tested to withstand more then 80 psi pressure
When compared to an Air/Air intercooler, a Liquid/Air system can handle more heat transfer and, therefore, more power for a given core size. This is due to the use of liquid as the charge cooling medium, which provides better heat transfer properties than air. Liquid/Air systems are well suited for applications where there may not be direct access to a cooling air stream, for instance in a rear or mid engine vehicle. Liquid/Air systems are also able to increase intercooler efficiencies beyond 100% through the use of chilled or ice water as a cooling medium.
- Fully polished
- 3" 76mm pipe outlets
- 2x Brass 1/2" Water inlet / outlets
- 2 x M8 Threaded Sensor ports
- Bar & Plate cooling channels
|
